Introductory CNC Mini Course: Cutting Board

In this three-session course, we will explore the process from a 3D model to production on a CNC router. You will design and make your own beechwood cutting board, with the option of adding a simple decorative strip inlay.

We will prepare a 3D model in Onshape and a CAM setup in Fusion 360, defining machining operations, toolpaths and the programme for the CNC controller.

During practical work, we will select and measure cutting tools, set up the machine, secure the wooden workpiece and define the machining origin. We will monitor the routing and cutting process. Working on a practical object, you will explore the connection between digital design, material preparation and safe machine operation.

Schedule

The programme will take place over 3 sessions:

• Tuesday, 3 November 2026, from 17:00 to 20:00
• Tuesday, 10 November 2026, from 17:00 to 20:00
• Tuesday, 17 November 2026, from 17:00 to 20:00

About the mentor

The course is led by Grega Matjan.

The programme counts as training for CNC.

***

Participants should gather in the entrance hall of Center Rog 15 minutes before the programme begins. Please store your personal belongings in the lockers indicated by the mentor. Do not be late, as this disrupts the working process. In case of late arrival, entry to the lab cannot be guaranteed.

The programme is held in Slovenian unless stated otherwise.

In case of cancellation, you will be notified two days before the planned start of the programme.

If you are unable to attend the programme, the fee is non-refundable and the date cannot be changed. You may transfer your place to another person by notifying us at least 24 hours before the start at les@center-rog.si.

We look forward to your company and creating together!