Silicone Mould-Making Masterclass with Hana Oľhová

date
14. 12. 2026 -
18. 12. 2026
time
4 p.m. - 8 p.m.
location
Glass Lab
for members
€400
for guests
€450
Free spots: 2/6

...

In this five-day masterclass with designer and artist Hana Oľhová, a member of the team at CIRVA in Marseille, we will learn to design and make a two-part silicone mould with a rigid acrylic mother mould.

We will focus on a process that allows us to reproduce a chosen model accurately. Using the silicone mould, we will create a wax reproduction and prepare it for the next stages of making a glass piece through lost-wax casting. You will also be able to apply these mould-making skills to other techniques and materials.

Each participant will work with their own chosen model, suitable for making a two-part silicone mould. Through practical work, we will learn to plan the mould’s parting line, build its rigid supporting shell, prepare and pour silicone, and cast and refine a wax reproduction.

Course outline

  • Day one – planning and clay work: we will examine the models, determine the parting line and build up clay to prepare the first half of the mould.
  • Day two – the acrylic mother mould: we will make the first half of the rigid acrylic shell, add registration keys and prepare the opposite side of the model.
  • Day three – the first silicone pour: we will complete the acrylic shell, remove the clay, clean the surfaces and prepare and pour the first half of the silicone mould.
  • Day four – silicone and wax: we will pour the second silicone half, remove the model once the silicone has cured and reassemble the mould. We will then explore the basics of wax casting and carry out the first wax pour.
  • Day five – refining the wax reproduction: we will demould and clean the wax piece, correct imperfections and add a venting system where needed. We will prepare it for the next stage: making a mould for glass casting.

After the five-day masterclass, an additional four-hour session will be arranged individually to continue the process with support from the lab mentors. We will make a refractory mould from plaster and silica flour and prepare for the subsequent glass casting. The finished glass pieces are expected to be ready by the end of December.

Schedule

The programme will take place over five sessions:

  • Monday, 14 December 2026, 4pm–8pm,
  • Tuesday, 15 December 2026, 4pm–8pm,
  • Wednesday, 16 December 2026, 4pm–8pm,
  • Thursday, 17 December 2026, 4pm–8pm,
  • Friday, 18 December 2026, 4pm–8pm.

If necessary, individual stages may also be completed in the morning or before the scheduled sessions. The additional four-hour session will be arranged with each participant separately.

About the mentor

Hana Oľhová graduated from the Glass Studio at UMPRUM, the Academy of Arts, Architecture and Design in Prague, in 2023. Her training covered a range of glass techniques, complemented by international internships and collaborations with Czech glass manufacturers.

From 2023 to 2026, she was part of the mould-making and casting team at Berengo Studio in Murano, contributing to the production of contemporary glass sculptures. Her practice focuses on cast glass, with a particular interest in lost-wax casting. Since March 2026, she has been a member of the team at CIRVA in Marseille, where she works with glass casting and fusing.

CIRVA and Center Rog

The masterclass is part of an international exchange between CIRVA and Center Rog, supporting the exchange of knowledge and experience in contemporary glass design. In October, Brigita Gantar, head of Center Rog’s Glass and Ceramics Labs, visited CIRVA on a study trip. In December, Hana Oľhová will share her expertise at Center Rog.

The programme is supported by the French Institute in Slovenia and Institut français in Paris.

***

Participants should gather in the entrance hall of Center Rog 15 minutes before the programme begins. Please store your personal belongings in the lockers indicated by the mentor. Do not be late, as this disrupts the working process. In case of late arrival, entry to the lab cannot be guaranteed.

The course is held in English.

In case of cancellation, you will be notified two days before the planned start of the programme.

If you are unable to attend the programme, the fee is non-refundable and the date cannot be changed. You may transfer your place to another person by notifying us at least 24 hours before the start at steklokeramika@center-rog.si.

We look forward to your company and creating together!

CIRVA_Institut_francais_prosojno

See more

Ejet 9X

Studio_ejet_slika1

EJET 9X is a high-performance electric boat introducing innovative electric propulsion technologies to the world of boating. Founded by Žiga Jarc, EJET aims to create an environmentally friendly electric boat that contributes to reducing...